- Includes the following commits:
    - [bcmshell.py] Match extra whitespace before prompt in regex (#3)
    - add support for qsfp28 eeprom (#2)

- Includes the following commits:
    - [bcmshell.py] Match extra whitespace before prompt in regex (#3)
    - add support for qsfp28 eeprom (#2)

- What I did

Fixed vanilla teamd bug, which prevented teamd to have a correct view of kernel state. Check bug #2 from the message
Changed schema for LACP port id.
Changed severity of an error message.
Removed logic to disable warm_start_read mode, when teamd started. It didn't work in system restart mode, because interfaces were added one by one, and it's impossible to say when everything is added.

- How I did it

I've added team_refresh() on every port addition
I extract port id from the port name. Currently I support only "EthernetX" scheme. We need to add more schemes if we change port scheme.
_err -> _info
...

- How to verify it
Build the image, install on your DUT, reboot it once, then reboot it on WR mode checking LACP state on remote side. The state shouldn't flip.

* Base DHCP relay Docker image on Strech base Docker

* Change URL for isc-dhcp source repository

* Upgrade isc-dhcp source branch to 4.3.5-3.1

* Update patch #1 to apply to isc-dhcp 4.3.5-3.1

* Update patch #2 to apply to isc-dhcp 4.3.5-3.1

* Update patch #3 to apply to isc-dhcp 4.3.5-3.1

* Update patch #4 to apply to isc-dhcp 4.3.5-3.1

* Remove security patches, as they are now applied as part of 4.3.5-3.1 source

* Reorder patches to apply bug fix first, then features

* Extend makefile to build debug Docker image

* Update commit that series file applies against

…c-net#2832)

* Base DHCP relay Docker image on Strech base Docker

* Change URL for isc-dhcp source repository

* Upgrade isc-dhcp source branch to 4.3.5-3.1

* Update patch sonic-net#1 to apply to isc-dhcp 4.3.5-3.1

* Update patch sonic-net#2 to apply to isc-dhcp 4.3.5-3.1

* Update patch sonic-net#3 to apply to isc-dhcp 4.3.5-3.1

* Update patch sonic-net#4 to apply to isc-dhcp 4.3.5-3.1

* Remove security patches, as they are now applied as part of 4.3.5-3.1 source

* Reorder patches to apply bug fix first, then features

* Extend makefile to build debug Docker image

* Update commit that series file applies against

* change package name to sonic-utilities

…onic-net#2)


* [yang-models]: First version of yang models for Port, VLan and ACL.

RB=
G=lnos-reviewers
R=pchaudhary,pmao,rmolina,samaity,sfardeen,zxu
A=

* [yangModelTesting.py]: Test code for POC.

Minor Corrections in yang model files.

* [sonic-interface.yang]: Interface yang model.

Minor changes in yang tree and other models.

* [Sonic Yang Tree]: Modified YANG models as per Guidelines.

Guideline doc: https://github.com/Azure/SONiC/blob/master/doc/mgmt/SONiC_YANG_Model_Guidelines.md

* Fix the stack-overflow issue in AclOrch::getTableById()

In case the table_id and m_mirrorTableId/m_mirrorTableId are empty
The function would be called recursively without ending.

```
If we have some rule that does not have table defined, it will trigger this issue.

(gdb) bt
#0  0x00007f77ac5af3a9 in swss::Logger::write (this=0x7f77ac801ec0 <swss::Logger::getInstance()::m_logger>, prio=swss::Logger::SWSS_DEBUG, fmt=0x7f77ac5f1690 ":> %s: enter")
    at logger.cpp:209
#1  0x00000000004a5792 in AclOrch::getTableById (this=this@entry=0x1c722a0, table_id="") at aclorch.cpp:2617
#2  0x00000000004a59d1 in AclOrch::getTableById (this=this@entry=0x1c722a0, table_id="") at aclorch.cpp:2634
#3  0x00000000004a59d1 in AclOrch::getTableById (this=this@entry=0x1c722a0, table_id="") at aclorch.cpp:2634
...
sonic-net#20944 0x00000000004a59d1 in AclOrch::getTableById (this=this@entry=0x1c722a0, table_id="") at aclorch.cpp:2634
sonic-net#20945 0x00000000004ad3ce in AclOrch::doAclRuleTask (this=this@entry=0x1c722a0, consumer=...) at aclorch.cpp:2437
sonic-net#20946 0x00000000004b04cd in AclOrch::doTask (this=0x1c722a0, consumer=...) at aclorch.cpp:2141
sonic-net#20947 0x00000000004231b2 in Orch::doTask (this=0x1c722a0) at orch.cpp:369
sonic-net#20948 0x000000000041c4e9 in OrchDaemon::start (this=this@entry=0x1c19960) at orchdaemon.cpp:376
sonic-net#20949 0x0000000000409ffc in main (argc=<optimized out>, argv=0x7ffe2e392d68) at main.cpp:295

(gdb) p table_id
$1 = ""
(gdb) p m_mirrorTableId
$2 = ""
(gdb) p m_mirrorV6TableId
$3 = ""
```

Signed-off-by: Zhenggen Xu <zxu@linkedin.com>

To fix a statistical issue. The original fix was done in FRRouting/frr#17297. However to accommodate 8.5.4 the patch in the PR was added.

[Thread debugging using libthread_db enabled]
Using host libthread_db library "/lib/x86_64-linux-gnu/libthread_db.so.1".
Core was generated by `/usr/lib/frr/zebra -A 127.0.0.1 -s 90000000 -M dplane_fpm_nl -M snmp'.
Program terminated with signal SIGABRT, Aborted.
#0  0x00007fccd7351e2c in ?? () from /lib/x86_64-linux-gnu/libc.so.6
[Current thread is 1 (Thread 0x7fccd6faf7c0 (LWP 36))]
(gdb) bt
#0  0x00007fccd7351e2c in ?? () from /lib/x86_64-linux-gnu/libc.so.6
#1  0x00007fccd7302fb2 in raise () from /lib/x86_64-linux-gnu/libc.so.6
#2  0x00007fccd72ed472 in abort () from /lib/x86_64-linux-gnu/libc.so.6
#3  0x00007fccd75bb3a9 in _zlog_assert_failed (xref=xref@entry=0x7fccd7652380 <_xref.16>, extra=extra@entry=0x0) at ../lib/zlog.c:678
#4  0x00007fccd759b2fe in route_node_delete (node=<optimized out>) at ../lib/table.c:352
#5  0x00007fccd759b445 in route_unlock_node (node=0x0) at ../lib/table.h:258
#6  route_next (node=<optimized out>) at ../lib/table.c:436
#7  route_next (node=node@entry=0x56029d89e560) at ../lib/table.c:410
#8  0x000056029b6b6b7a in if_lookup_by_name_per_ns (ns=ns@entry=0x56029d873d90, ifname=ifname@entry=0x7fccc0029340 "PortChannel1020")
    at ../zebra/interface.c:312
#9  0x000056029b6b8b36 in zebra_if_dplane_ifp_handling (ctx=0x7fccc0029310) at ../zebra/interface.c:1867
#10 zebra_if_dplane_result (ctx=0x7fccc0029310) at ../zebra/interface.c:2221
#11 0x000056029b7137a9 in rib_process_dplane_results (thread=<optimized out>) at ../zebra/zebra_rib.c:4810
#12 0x00007fccd75a0e0d in thread_call (thread=thread@entry=0x7ffe8e553cc0) at ../lib/thread.c:1990
#13 0x00007fccd7559368 in frr_run (master=0x56029d65a040) at ../lib/libfrr.c:1198
#14 0x000056029b6ac317 in main (argc=9, argv=0x7ffe8e5540d8) at ../zebra/main.c:478

Adding the below fix from FRR FRRouting/frr#17297

This is to fix the following crash which is a statistical issue

[Thread debugging using libthread_db enabled]
Using host libthread_db library "/lib/x86_64-linux-gnu/libthread_db.so.1".
Core was generated by `/usr/lib/frr/zebra -A 127.0.0.1 -s 90000000 -M dplane_fpm_nl -M snmp'.
Program terminated with signal SIGABRT, Aborted.
#0  0x00007fccd7351e2c in ?? () from /lib/x86_64-linux-gnu/libc.so.6
[Current thread is 1 (Thread 0x7fccd6faf7c0 (LWP 36))]
(gdb) bt
#0  0x00007fccd7351e2c in ?? () from /lib/x86_64-linux-gnu/libc.so.6
#1  0x00007fccd7302fb2 in raise () from /lib/x86_64-linux-gnu/libc.so.6
#2  0x00007fccd72ed472 in abort () from /lib/x86_64-linux-gnu/libc.so.6
#3  0x00007fccd75bb3a9 in _zlog_assert_failed (xref=xref@entry=0x7fccd7652380 <_xref.16>, extra=extra@entry=0x0) at ../lib/zlog.c:678
#4  0x00007fccd759b2fe in route_node_delete (node=<optimized out>) at ../lib/table.c:352
#5  0x00007fccd759b445 in route_unlock_node (node=0x0) at ../lib/table.h:258
#6  route_next (node=<optimized out>) at ../lib/table.c:436
#7  route_next (node=node@entry=0x56029d89e560) at ../lib/table.c:410
#8  0x000056029b6b6b7a in if_lookup_by_name_per_ns (ns=ns@entry=0x56029d873d90, ifname=ifname@entry=0x7fccc0029340 "PortChannel1020")
    at ../zebra/interface.c:312
#9  0x000056029b6b8b36 in zebra_if_dplane_ifp_handling (ctx=0x7fccc0029310) at ../zebra/interface.c:1867
#10 zebra_if_dplane_result (ctx=0x7fccc0029310) at ../zebra/interface.c:2221
#11 0x000056029b7137a9 in rib_process_dplane_results (thread=<optimized out>) at ../zebra/zebra_rib.c:4810
#12 0x00007fccd75a0e0d in thread_call (thread=thread@entry=0x7ffe8e553cc0) at ../lib/thread.c:1990
#13 0x00007fccd7559368 in frr_run (master=0x56029d65a040) at ../lib/libfrr.c:1198
#14 0x000056029b6ac317 in main (argc=9, argv=0x7ffe8e5540d8) at ../zebra/main.c:478

<!--
     Please make sure you've read and understood our contributing guidelines:
     https://github.com/Azure/SONiC/blob/gh-pages/CONTRIBUTING.md

     ** Make sure all your commits include a signature generated with `git commit -s` **

     If this is a bug fix, make sure your description includes "fixes #xxxx", or
     "closes #xxxx" or "resolves #xxxx"

     Please provide the following information:
-->

#### Why I did it

Adding the below fix from FRR FRRouting/frr#17297

This is to fix the following crash which is a statistical issue

```
[Thread debugging using libthread_db enabled]
Using host libthread_db library "/lib/x86_64-linux-gnu/libthread_db.so.1".
Core was generated by `/usr/lib/frr/zebra -A 127.0.0.1 -s 90000000 -M dplane_fpm_nl -M snmp'.
Program terminated with signal SIGABRT, Aborted.
#0  0x00007fccd7351e2c in ?? () from /lib/x86_64-linux-gnu/libc.so.6
[Current thread is 1 (Thread 0x7fccd6faf7c0 (LWP 36))]
(gdb) bt
#0  0x00007fccd7351e2c in ?? () from /lib/x86_64-linux-gnu/libc.so.6
sonic-net#1  0x00007fccd7302fb2 in raise () from /lib/x86_64-linux-gnu/libc.so.6
sonic-net#2  0x00007fccd72ed472 in abort () from /lib/x86_64-linux-gnu/libc.so.6
sonic-net#3  0x00007fccd75bb3a9 in _zlog_assert_failed (xref=xref@entry=0x7fccd7652380 <_xref.16>, extra=extra@entry=0x0) at ../lib/zlog.c:678
sonic-net#4  0x00007fccd759b2fe in route_node_delete (node=<optimized out>) at ../lib/table.c:352
sonic-net#5  0x00007fccd759b445 in route_unlock_node (node=0x0) at ../lib/table.h:258
sonic-net#6  route_next (node=<optimized out>) at ../lib/table.c:436
sonic-net#7  route_next (node=node@entry=0x56029d89e560) at ../lib/table.c:410
sonic-net#8  0x000056029b6b6b7a in if_lookup_by_name_per_ns (ns=ns@entry=0x56029d873d90, ifname=ifname@entry=0x7fccc0029340 "PortChannel1020")
    at ../zebra/interface.c:312
sonic-net#9  0x000056029b6b8b36 in zebra_if_dplane_ifp_handling (ctx=0x7fccc0029310) at ../zebra/interface.c:1867
sonic-net#10 zebra_if_dplane_result (ctx=0x7fccc0029310) at ../zebra/interface.c:2221
sonic-net#11 0x000056029b7137a9 in rib_process_dplane_results (thread=<optimized out>) at ../zebra/zebra_rib.c:4810
sonic-net#12 0x00007fccd75a0e0d in thread_call (thread=thread@entry=0x7ffe8e553cc0) at ../lib/thread.c:1990
sonic-net#13 0x00007fccd7559368 in frr_run (master=0x56029d65a040) at ../lib/libfrr.c:1198
sonic-net#14 0x000056029b6ac317 in main (argc=9, argv=0x7ffe8e5540d8) at ../zebra/main.c:478
```

##### Work item tracking
- Microsoft ADO **(number only)**:

#### How I did it
Added patch.

#### How to verify it
Running BGP tests.

<!--
If PR needs to be backported, then the PR must be tested against the base branch and the earliest backport release branch and provide tested image version on these two branches. For example, if the PR is requested for master, 202211 and 202012, then the requester needs to provide test results on master and 202012.
-->

#### Which release branch to backport (provide reason below if selected)

<!--
- Note we only backport fixes to a release branch, *not* features!
- Please also provide a reason for the backporting below.
- e.g.
- [x] 202006
-->

- [ ] 201811
- [ ] 201911
- [ ] 202006
- [ ] 202012
- [ ] 202106
- [ ] 202111
- [ ] 202205
- [ ] 202211
- [ ] 202305

#### Tested branch (Please provide the tested image version)

<!--
- Please provide tested image version
- e.g.
- [x] 20201231.100
-->

- [ ] <!-- image version 1 -->
- [ ] <!-- image version 2 -->

#### Description for the changelog
<!--
Write a short (one line) summary that describes the changes in this
pull request for inclusion in the changelog:
-->

<!--
 Ensure to add label/tag for the feature raised. example - PR#2174 under sonic-utilities repo. where, Generic Config and Update feature has been labelled as GCU.
-->

#### Link to config_db schema for YANG module changes
<!--
Provide a link to config_db schema for the table for which YANG model
is defined
Link should point to correct section on https://github.com/Azure/sonic-buildimage/blob/master/src/sonic-yang-models/doc/Configuration.md
-->

#### A picture of a cute animal (not mandatory but encouraged)

<!--
 Please make sure you've read and understood our contributing guidelines:
 https://github.com/Azure/SONiC/blob/gh-pages/CONTRIBUTING.md

 failure_prs.log skip_prs.log Make sure all your commits include a signature generated with `git commit -s` **

 If this is a bug fix, make sure your description includes "fixes #xxxx", or
 "closes #xxxx" or "resolves #xxxx"

 Please provide the following information:
-->

#### Why I did it

Adding the below fix from FRR FRRouting/frr#17297

This is to fix the following crash which is a statistical issue

```
[Thread debugging using libthread_db enabled]
Using host libthread_db library "/lib/x86_64-linux-gnu/libthread_db.so.1".
Core was generated by `/usr/lib/frr/zebra -A 127.0.0.1 -s 90000000 -M dplane_fpm_nl -M snmp'.
Program terminated with signal SIGABRT, Aborted.
#0 0x00007fccd7351e2c in ?? () from /lib/x86_64-linux-gnu/libc.so.6
[Current thread is 1 (Thread 0x7fccd6faf7c0 (LWP 36))]
(gdb) bt
#0 0x00007fccd7351e2c in ?? () from /lib/x86_64-linux-gnu/libc.so.6
#1 0x00007fccd7302fb2 in raise () from /lib/x86_64-linux-gnu/libc.so.6
#2 0x00007fccd72ed472 in abort () from /lib/x86_64-linux-gnu/libc.so.6
#3 0x00007fccd75bb3a9 in _zlog_assert_failed (xref=xref@entry=0x7fccd7652380 <_xref.16>, extra=extra@entry=0x0) at ../lib/zlog.c:678
#4 0x00007fccd759b2fe in route_node_delete (node=<optimized out>) at ../lib/table.c:352
#5 0x00007fccd759b445 in route_unlock_node (node=0x0) at ../lib/table.h:258
#6 route_next (node=<optimized out>) at ../lib/table.c:436
#7 route_next (node=node@entry=0x56029d89e560) at ../lib/table.c:410
#8 0x000056029b6b6b7a in if_lookup_by_name_per_ns (ns=ns@entry=0x56029d873d90, ifname=ifname@entry=0x7fccc0029340 "PortChannel1020")
 at ../zebra/interface.c:312
#9 0x000056029b6b8b36 in zebra_if_dplane_ifp_handling (ctx=0x7fccc0029310) at ../zebra/interface.c:1867
#10 zebra_if_dplane_result (ctx=0x7fccc0029310) at ../zebra/interface.c:2221
#11 0x000056029b7137a9 in rib_process_dplane_results (thread=<optimized out>) at ../zebra/zebra_rib.c:4810
#12 0x00007fccd75a0e0d in thread_call (thread=thread@entry=0x7ffe8e553cc0) at ../lib/thread.c:1990
#13 0x00007fccd7559368 in frr_run (master=0x56029d65a040) at ../lib/libfrr.c:1198
#14 0x000056029b6ac317 in main (argc=9, argv=0x7ffe8e5540d8) at ../zebra/main.c:478
```

##### Work item tracking
- Microsoft ADO **(number only)**:

#### How I did it
Added patch.

#### How to verify it
Running BGP tests.

<!--
If PR needs to be backported, then the PR must be tested against the base branch and the earliest backport release branch and provide tested image version on these two branches. For example, if the PR is requested for master, 202211 and 202012, then the requester needs to provide test results on master and 202012.
-->

#### Which release branch to backport (provide reason below if selected)

<!--
- Note we only backport fixes to a release branch, *not* features!
- Please also provide a reason for the backporting below.
- e.g.
- [x] 202006
-->

- [ ] 201811
- [ ] 201911
- [ ] 202006
- [ ] 202012
- [ ] 202106
- [ ] 202111
- [ ] 202205
- [ ] 202211
- [ ] 202305

#### Tested branch (Please provide the tested image version)

<!--
- Please provide tested image version
- e.g.
- [x] 20201231.100
-->

- [ ] <!-- image version 1 -->
- [ ] <!-- image version 2 -->

#### Description for the changelog
<!--
Write a short (one line) summary that describes the changes in this
pull request for inclusion in the changelog:
-->

<!--
 Ensure to add label/tag for the feature raised. example - PR#2174 under sonic-utilities repo. where, Generic Config and Update feature has been labelled as GCU.
-->

#### Link to config_db schema for YANG module changes
<!--
Provide a link to config_db schema for the table for which YANG model
is defined
Link should point to correct section on https://github.com/Azure/sonic-buildimage/blob/master/src/sonic-yang-models/doc/Configuration.md
-->

#### A picture of a cute animal (not mandatory but encouraged)

…sue. (#22342)

Fix TACACS config revert to old config when device reboot issue.

#### Why I did it
Fix following bug:

1. When SONiC OS upgrade, old TACACS config will save to /etc/sonic/old_config/tacacs.json
2. After device reboot, TACACS config service (https://github.com/sonic-net/sonic-buildimage/blob/master/files/build_templates/tacacs-config.service) will restore TACACS config from /etc/sonic/old_config/tacacs.json, but this file will keep no change after restore TACACS config.
3. If TACACS service changed by user, because of #2, if device reboot again, the TACACS config been reverted back to old config in /etc/sonic/old_config/tacacs.json

Note: the TACACS config does not revert immediately after reboot, it will delay 5min 30sec:
https://github.com/sonic-net/sonic-buildimage/blob/master/files/build_templates/tacacs-config.timer

##### Work item tracking
- Microsoft ADO **(number only)**:32338799

#### How I did it
Move /etc/sonic/old_config/tacacs.json to /etc/sonic/old_config/tacacs.json_backup

#### How to verify it
Pass all test case.
Manually verify with following steps:

admin@vlab-01:~$ show tacacs
TACPLUS global auth_type login
TACPLUS global timeout 5 (default)
TACPLUS global passkey testing123

TACPLUS_SERVER address 10.250.0.102
               priority 1
               tcp_port 49

admin@vlab-01:~$ echo '
> {
>     "TACPLUS": {"global": { "auth_type": "login", "passkey": "12345" } }
> }' > /etc/sonic/old_config/tacacs.json
admin@vlab-01:~$ cat /etc/sonic/old_config/tacacs.json

{
    "TACPLUS": {"global": { "auth_type": "login", "passkey": "12345" } }
}

// then reboot device and wait for 6 minutes, because the TACACS config service will delay 5min 30sec after reboot:
https://github.com/sonic-net/sonic-buildimage/blob/master/files/build_templates/tacacs-config.timer

admin@vlab-01:~$ ls /etc/sonic/old_config/tacacs.json
ls: cannot access '/etc/sonic/old_config/tacacs.json': No such file or directory
admin@vlab-01:~$ show tacacs
TACPLUS global auth_type login
TACPLUS global timeout 5 (default)
TACPLUS global passkey 12345

TACPLUS_SERVER address 10.250.0.102
               priority 1
               tcp_port 49

#### Description for the changelog
Fix TACACS config revert to old config when device reboot issue.

…c-net#18947)" (sonic-net#2…"

This reverts commit 80d660d.

<!--
     Please make sure you've read and understood our contributing guidelines:
     https://github.com/Azure/SONiC/blob/gh-pages/CONTRIBUTING.md

     ** Make sure all your commits include a signature generated with `git commit -s` **

     If this is a bug fix, make sure your description includes "fixes #xxxx", or
     "closes #xxxx" or "resolves #xxxx"

     Please provide the following information:
-->

#### Why I did it

Adding the below fix from FRR FRRouting/frr#17297

This is to fix the following crash which is a statistical issue

```
[Thread debugging using libthread_db enabled]
Using host libthread_db library "/lib/x86_64-linux-gnu/libthread_db.so.1".
Core was generated by `/usr/lib/frr/zebra -A 127.0.0.1 -s 90000000 -M dplane_fpm_nl -M snmp'.
Program terminated with signal SIGABRT, Aborted.
#0  0x00007fccd7351e2c in ?? () from /lib/x86_64-linux-gnu/libc.so.6
[Current thread is 1 (Thread 0x7fccd6faf7c0 (LWP 36))]
(gdb) bt
#0  0x00007fccd7351e2c in ?? () from /lib/x86_64-linux-gnu/libc.so.6
#1  0x00007fccd7302fb2 in raise () from /lib/x86_64-linux-gnu/libc.so.6
#2  0x00007fccd72ed472 in abort () from /lib/x86_64-linux-gnu/libc.so.6
#3  0x00007fccd75bb3a9 in _zlog_assert_failed (xref=xref@entry=0x7fccd7652380 <_xref.16>, extra=extra@entry=0x0) at ../lib/zlog.c:678
#4  0x00007fccd759b2fe in route_node_delete (node=<optimized out>) at ../lib/table.c:352
#5  0x00007fccd759b445 in route_unlock_node (node=0x0) at ../lib/table.h:258
#6  route_next (node=<optimized out>) at ../lib/table.c:436
#7  route_next (node=node@entry=0x56029d89e560) at ../lib/table.c:410
#8  0x000056029b6b6b7a in if_lookup_by_name_per_ns (ns=ns@entry=0x56029d873d90, ifname=ifname@entry=0x7fccc0029340 "PortChannel1020")
    at ../zebra/interface.c:312
#9  0x000056029b6b8b36 in zebra_if_dplane_ifp_handling (ctx=0x7fccc0029310) at ../zebra/interface.c:1867
#10 zebra_if_dplane_result (ctx=0x7fccc0029310) at ../zebra/interface.c:2221
#11 0x000056029b7137a9 in rib_process_dplane_results (thread=<optimized out>) at ../zebra/zebra_rib.c:4810
#12 0x00007fccd75a0e0d in thread_call (thread=thread@entry=0x7ffe8e553cc0) at ../lib/thread.c:1990
#13 0x00007fccd7559368 in frr_run (master=0x56029d65a040) at ../lib/libfrr.c:1198
sonic-net#14 0x000056029b6ac317 in main (argc=9, argv=0x7ffe8e5540d8) at ../zebra/main.c:478
```

##### Work item tracking
- Microsoft ADO **(number only)**:

#### How I did it
Added patch.

#### How to verify it
Running BGP tests.

<!--
If PR needs to be backported, then the PR must be tested against the base branch and the earliest backport release branch and provide tested image version on these two branches. For example, if the PR is requested for master, 202211 and 202012, then the requester needs to provide test results on master and 202012.
-->

#### Which release branch to backport (provide reason below if selected)

<!--
- Note we only backport fixes to a release branch, *not* features!
- Please also provide a reason for the backporting below.
- e.g.
- [x] 202006
-->

- [ ] 201811
- [ ] 201911
- [ ] 202006
- [ ] 202012
- [ ] 202106
- [ ] 202111
- [ ] 202205
- [ ] 202211
- [ ] 202305

#### Tested branch (Please provide the tested image version)

<!--
- Please provide tested image version
- e.g.
- [x] 20201231.100
-->

- [ ] <!-- image version 1 -->
- [ ] <!-- image version 2 -->

#### Description for the changelog
<!--
Write a short (one line) summary that describes the changes in this
pull request for inclusion in the changelog:
-->

<!--
 Ensure to add label/tag for the feature raised. example - PR#2174 under sonic-utilities repo. where, Generic Config and Update feature has been labelled as GCU.
-->

#### Link to config_db schema for YANG module changes
<!--
Provide a link to config_db schema for the table for which YANG model
is defined
Link should point to correct section on https://github.com/Azure/sonic-buildimage/blob/master/src/sonic-yang-models/doc/Configuration.md
-->

#### A picture of a cute animal (not mandatory but encouraged)

…et#2)

* fix: Adjust paths of local path overrides

* fix: s:target_release:suiltes:

* fix: Add bazelignore to ignore internal modules

* feat(swss): Wire swss and sairedis to MODULE.bazel

* fix(swss): Add libdashapi pkg

* checkpoint: Almost all the rdeps of docker-swss-layer-bookworm

* fix: Almost there, need cfggen

* cleanup: Upgrade rules_py, remove patch

* fix(cfggen): Add libyang as a dep of cfggen bin

* WIP: Almost all of docker-orchagent

* cleanup: Upgrade tar.bzl

* fix(sdist_build_from_src): Add repository name to sdist package

* fix(sonic-cfggen-bin): Pipe in more dependencies for cfggen CLI

* checkpoint: Can run configgen without crashing

* checkpoint(orchagent): create docker-init.sh

* checkpoint: clean paths

* cleanup: remove TODOs

* fix: Path to supervisord

* cleanup

- Use free -m with division instead of free -g to avoid rounding (#1)
- Add = and ?= to Makefile dependency regex patterns (sonic-net#2, sonic-net#7)
- CPU calculation now uses /proc/stat delta (two reads) (sonic-net#3, sonic-net#14)
- Fix misleading 'critical path estimate' comment (sonic-net#4)
- Fix parallelism timeline comment (60s not 10s) (sonic-net#5)
- Include after-relationship packages in fan stats (sonic-net#6)
- Guard disk I/O division by zero when INTERVAL<=1 (sonic-net#8)
- Remove unused elapsed_line variable (sonic-net#9)
- Remove redundant LIBSWSSCOMMON_DBG check (sonic-net#10)
- Remove active_make_jobs from CSV header comment (sonic-net#11)
- Wire up _RDEPENDS parsing to build reverse deps (sonic-net#12)
- Remove unnecessary 'if v' filter on rdeps JSON (sonic-net#13)
- Remove unused REPORT_FORMAT parameter (sonic-net#15)
- Add cycle detection to critical path algorithm (sonic-net#16)
- Add execute permission check for companion scripts (sonic-net#17)

Signed-off-by: Rustiqly <rustiqly@users.noreply.github.com>

* [build] Add build timing report and dependency analysis tools

Add three scripts for build performance instrumentation:

- scripts/build-timing-report.sh: Parse per-package timing from build
  logs (HEADER/FOOTER timestamps), generate sorted duration table,
  phase breakdown, parallelism timeline, and CSV export.

- scripts/build-dep-graph.py: Parse rules/*.mk dependency graph,
  compute critical path, fan-out/fan-in bottleneck analysis, and
  generate DOT/JSON output for visualization.

- scripts/build-resource-monitor.sh: Sample CPU, memory, disk I/O,
  and Docker container count during builds for resource utilization
  analysis.

Add "make build-report" target to slave.mk that runs the timing
report and dependency analysis after a build completes.

Example output from a VS build on 24-core/30GB machine:
- 210 packages built in 53m wall time (173m CPU)
- Max concurrency: 5 (with SONIC_CONFIG_BUILD_JOBS=4)
- Critical path: 14 packages deep (libnl -> libswsscommon -> utilities)
- Top bottleneck: LIBSWSSCOMMON with 48 downstream dependents

Signed-off-by: Rustiqly <rustiqly@users.noreply.github.com>

* Address Copilot review: fix 17 bugs in build analysis scripts

- Use free -m with division instead of free -g to avoid rounding (#1)
- Add = and ?= to Makefile dependency regex patterns (#2, #7)
- CPU calculation now uses /proc/stat delta (two reads) (#3, #14)
- Fix misleading 'critical path estimate' comment (#4)
- Fix parallelism timeline comment (60s not 10s) (#5)
- Include after-relationship packages in fan stats (#6)
- Guard disk I/O division by zero when INTERVAL<=1 (#8)
- Remove unused elapsed_line variable (#9)
- Remove redundant LIBSWSSCOMMON_DBG check (#10)
- Remove active_make_jobs from CSV header comment (#11)
- Wire up _RDEPENDS parsing to build reverse deps (#12)
- Remove unnecessary 'if v' filter on rdeps JSON (#13)
- Remove unused REPORT_FORMAT parameter (#15)
- Add cycle detection to critical path algorithm (#16)
- Add execute permission check for companion scripts (#17)

Signed-off-by: Rustiqly <rustiqly@users.noreply.github.com>

---------

Signed-off-by: Rustiqly <rustiqly@users.noreply.github.com>
Co-authored-by: Rustiqly <rustiqly@users.noreply.github.com>

- Use free -m with division instead of free -g to avoid rounding (#1)
- Add = and ?= to Makefile dependency regex patterns (sonic-net#2, sonic-net#7)
- CPU calculation now uses /proc/stat delta (two reads) (sonic-net#3, sonic-net#14)
- Fix misleading 'critical path estimate' comment (sonic-net#4)
- Fix parallelism timeline comment (60s not 10s) (sonic-net#5)
- Include after-relationship packages in fan stats (sonic-net#6)
- Guard disk I/O division by zero when INTERVAL<=1 (sonic-net#8)
- Remove unused elapsed_line variable (sonic-net#9)
- Remove redundant LIBSWSSCOMMON_DBG check (sonic-net#10)
- Remove active_make_jobs from CSV header comment (sonic-net#11)
- Wire up _RDEPENDS parsing to build reverse deps (sonic-net#12)
- Remove unnecessary 'if v' filter on rdeps JSON (sonic-net#13)
- Remove unused REPORT_FORMAT parameter (sonic-net#15)
- Add cycle detection to critical path algorithm (sonic-net#16)
- Add execute permission check for companion scripts (sonic-net#17)

Signed-off-by: Rustiqly <rustiqly@users.noreply.github.com>

…net#25643)

* [build] Add build timing report and dependency analysis tools

Add three scripts for build performance instrumentation:

- scripts/build-timing-report.sh: Parse per-package timing from build
  logs (HEADER/FOOTER timestamps), generate sorted duration table,
  phase breakdown, parallelism timeline, and CSV export.

- scripts/build-dep-graph.py: Parse rules/*.mk dependency graph,
  compute critical path, fan-out/fan-in bottleneck analysis, and
  generate DOT/JSON output for visualization.

- scripts/build-resource-monitor.sh: Sample CPU, memory, disk I/O,
  and Docker container count during builds for resource utilization
  analysis.

Add "make build-report" target to slave.mk that runs the timing
report and dependency analysis after a build completes.

Example output from a VS build on 24-core/30GB machine:
- 210 packages built in 53m wall time (173m CPU)
- Max concurrency: 5 (with SONIC_CONFIG_BUILD_JOBS=4)
- Critical path: 14 packages deep (libnl -> libswsscommon -> utilities)
- Top bottleneck: LIBSWSSCOMMON with 48 downstream dependents

Signed-off-by: Rustiqly <rustiqly@users.noreply.github.com>

* Address Copilot review: fix 17 bugs in build analysis scripts

- Use free -m with division instead of free -g to avoid rounding (sonic-net#1)
- Add = and ?= to Makefile dependency regex patterns (sonic-net#2, sonic-net#7)
- CPU calculation now uses /proc/stat delta (two reads) (sonic-net#3, sonic-net#14)
- Fix misleading 'critical path estimate' comment (sonic-net#4)
- Fix parallelism timeline comment (60s not 10s) (sonic-net#5)
- Include after-relationship packages in fan stats (sonic-net#6)
- Guard disk I/O division by zero when INTERVAL<=1 (sonic-net#8)
- Remove unused elapsed_line variable (sonic-net#9)
- Remove redundant LIBSWSSCOMMON_DBG check (sonic-net#10)
- Remove active_make_jobs from CSV header comment (sonic-net#11)
- Wire up _RDEPENDS parsing to build reverse deps (sonic-net#12)
- Remove unnecessary 'if v' filter on rdeps JSON (sonic-net#13)
- Remove unused REPORT_FORMAT parameter (sonic-net#15)
- Add cycle detection to critical path algorithm (sonic-net#16)
- Add execute permission check for companion scripts (sonic-net#17)

Signed-off-by: Rustiqly <rustiqly@users.noreply.github.com>

---------

Signed-off-by: Rustiqly <rustiqly@users.noreply.github.com>
Co-authored-by: Rustiqly <rustiqly@users.noreply.github.com>
Signed-off-by: Feng Pan <fenpan@microsoft.com>